|
TSI STONE CLEAN
USES:
TSI Stone Clean can be used on any surface such as marble, granite, limestone, terrazzo, porcelain and ceramic tile, vinyl, etc. as a restorer, daily maintenance solution or grout film remover. |
| Coverage will vary depending upon the porosity of the substrate. Sample application should be applied on all projects to determine porosity. |
DIRECTIONS:
Mix 2 oz. TSI Stone Clean
per gallon of water for polished and nonabsorbent flooring. For Honed, flame-cut, tumbled and absorbent flooring, reduce mix to 1 oz. per 1 gallon of water. For spray buffing applications or extremely soiled surfaces, mix 4 oz. per 1 gallon of water. Grout film removal mixture is dependent on grout type and degree of film. Test at 2-3 oz. per 1 gallon of water for best mixture, using white polishing pad to break mechanical bond. For extremely dirty surfaces, flood mop allowing solution time to work. Mop or vacuum up dirt laden solution. Under normal conditions, do not rinse. The floor can be buffed dry to enhance luster. TSI Stone Clean also helps increase slip resistance. | |
|
|
|---|
