TSI STONE STRIP USES: TSI Stone Strip can be used on any surface such as marble, granite, limestone, terrazzo, porcelain and ceramic tile, onyx and serpentine. Not for use on wood, painted surfaces, linoleum, rubber and certain VCT products- Product may soften or bleach these materials. Coverage will vary depending upon the porosity of the substrate. Sample application should be applied on all projects to determine porosity. DIRECTIONS: Mix 2 oz. TSI Stone Strip Mix desired solution ratio with HOT water. Always strip small area to determine best dilution ratio. Apply with mop or pneumatic sprayer. Apply and keep wet for 5 minutes, allowing solution to penetrate and emulsify finish. Agitate with scrub grade brush, floor machine or by hand to ensure removal of finish in grout joints and corners. With mop. wet vac, or automatic scrubber, extract finish laden solution from floor. No rinsing is required. If floor requires other restorative measures, mop with TSI Stone Clean to protect and keep clean.