EB 15 Cartridge System

EB 15 is a very fast setting, two component, epoxy adhesive. EB 15 "A" and "B" are both clear in color. EB 15 is conveniently packaged in 25 ml x 25 ml, 75 ml x 75 ml, 150 ml x 150 ml and 300 ml x 300 ml cartridges. EB 15 utilizes a two component manual or pneumatic gun applicator to assure user a quick, consistent mix, time after time. EB 15 is easily and neatly dispensed to substrate for bonding.
BASIC USES EB 15 has good adhesion to natural stone, brick, concrete, wood, steel, aluminum, fiberglass and some plastics. EB 15 may be used for setting steel rods in stone or similar substrates, spot welding, quick patching and hard to reach areas that need repair.
SAMPLE TESTING A test application is strongly suggested due to the differences of each material. User must determine suitability of the product for their intended use.
APPLICATION All surfaces must be completely dry and free of dirt for maximum bond strength. It is recommended that smooth surfaces be lightly sanded to ensure maximum bond strength of adhesive. After using static mixer, dispose of and re-cap cartridge for future use. When working with any chemicals, care should be taken to keep them away from one's skin. If contact with skin takes place, wash thoroughly with soap and water immediately.

Custom Bond clear flowing epoxy is a two part epoxy adhesive characterized by excellent clarity, adhesion, water and chemical resistance. This system finds particular use as a bonding agent for all natural stone, concrete, as well as many other substrates. It is recommended for exterior applications and applications requiring durable bond strength. This system is non-abrasive to dispensing equipment.